EICA Solutions

Electrical, Instrumentation, Controls & Automation

Electrical, instrumentation, control and automation systems designed, procured, installed and commissioned by one team, as part of a turnkey plant or as a retrofit, upgrade or modification of existing power and control systems.

Design to start-up

one team designs, procures, installs and commissions EICA systems

SIL 1, 2 & 3

safety instrumented systems designed to safety integrity levels

13+ OEMs

relationships with Siemens, Schneider, ABB, Emerson, Yokogawa and more

In-house panels

power and control panel building is a dedicated business segment

OVERVIEW

Specialised disciplines, one accountable team

EICA are specialised disciplines. They form part of the systems that make up a plant, but they deserve dedicated attention, almost like an independent project. That is why main EPC contractors carefully select their EICA subcontractors.
Selex can act as EICA subcontractor to itself, where we are the EPC contractor, or to other EPC contractors. We evolved from a well-established EICA company, ARIL Technologies Limited. We design, procure, construct or install, and commission EICA systems as part of a turnkey plant construction project, or as part of an EICA retrofit, upgrade or modification of plant power and control systems.
On many greenfield projects the EICA subcontract leaves out engineering and procurement, and that is where commissioning failures begin.
Before we accept a subcontract, we validate the EICA engineering design and confirm the procurement MTO.

HOW AN EICA PROJECT RUNS

Design, validation and standards
OEM-backed technical buying
Bases, trays, cabling, panels
Configuration, calibration, start-up

ENGINEERING & DESIGN

Designs we install and commission ourselves

Our engineers have experience across plant power generation, electricity distribution, electrical safety, lighting, electric-based corrosion control, instrumentation, metering, automatic control, fire & gas, and analysing. We design for both turnkey and retrofit projects.
We take full responsibility for our designs because we are bound to install and commission them. Our engineers do not only sit in the office: they liaise with manufacturers, supervise field installation and commission the systems. Where possible, designs are validated with each manufacturer whose products feature in them.

DESIGN TOOLS

STANDARDS LIBRARY

DELIVERABLES

What our engineering package covers

Electrical

Area plans (including hazardous area classification), layout drawings, one-line diagrams, schematics, installation details, lists and schedules, calculations, studies and reports, interconnection diagrams, and equipment drawings including vendor prints.

Instrumentation & Control

P&ID revision, basis of design, instrument index, specifications and datasheets, loop diagrams, hook-up diagrams, cable and termination schedules, I/O schedules, control logic diagrams, and instrument location and cable routing drawings.

Control, Automation & SCADA

Automation and SCADA philosophy, PLC/DCS/SIS logic development, integrated control and SCADA architecture, HMI and LOI graphics, network architecture, alarm and event configuration, and preparation of operator training and maintenance.

Studies & Reports

System studies showing fault levels, arc flash effect and short circuit current, load flow analysis, motor starting effects and system stability, transformer tap settings, motor protection settings, and relay setting schedules.

Calculations

Cable tray sizing, heat tracing, equipment sizing, lighting level and emergency power load calculations, plus instrument design data and engineering calculations.

Documentation

Equipment datasheets, manufacturing data books, installation and maintenance manuals, spare parts lists, and requisitions for equipment and bulk materials.

PROCUREMENT

Technical buying, managed through OEM relationships

Buying for EICA projects is a highly technical task that needs a proper understanding of each piece of equipment and how it fits the overall project. Procurement drives cost and schedule, so we manage it through relationships with manufacturers and suppliers.
We save time and money for clients and main contractors through discounts on products from the OEMs we partner with for local sales representation, and we offer alternatives when necessary. Our dedicated procurement personnel, and our engineers, are trained in sourcing, buying and expediting. We maintain master lists of suppliers and manufacturers that are revised regularly.

OEM RELATIONSHIPS

We maintain relationships at different levels with major OEMs, including:

CONSTRUCTION & INSTALLATION

In-house teams, from equipment bases to cable termination

Our in-house EICA implementation teams include project managers, HSE and QC officers, discipline and multidiscipline engineers, commissioning experts, and specialist and multi-skilled technicians. This is the backbone of our construction and installation work. Fabrication quality is controlled, with weld type and grade aligned to plant structural requirements for secondary structures.

OUR OPERATIONS COVER

CONFIGURATION & COMMISSIONING

Commissioning led by Selex directors

Our experienced commissioning engineers are often led by the company’s lead director into any complex commissioning exercise. The directors of Selex take full responsibility for commissioning.
We follow procedures with inputs from OEMs, clients and Selex team members. Configuring and commissioning EICA systems needs personnel who are highly knowledgeable and meticulous.

OUR COMMISSIONING CHECKLIST ENSURES

POWER & ELECTRICAL

Generation, distribution and switching, built by Selex

In oil & gas, apart from some midstream and downstream facilities, most process facilities generate their own power. We are experienced in the design, construction, operations and maintenance of self-generated, shore and hybrid power, including the switching between sources.
We design power systems for adequacy and stability of supply, ease of maintenance, cost saving, equipment protection, personnel safety and environmental protection, using ETAP, SKM and MATLAB.

WHAT WE DESIGN AND BUILD

Where the 500 kVA line sits

Plant power generation below 500 kVA is handled as electrical services. Above 500 kVA it is treated as plant construction, because of the engine, cooling, fuelling, RMU, cabling, transformer, metering and exhaust works involved.

Power synchronization

Sync panels, mostly Woodward relay module and PLC based, for load balancing, load shedding and optimization of supply. Two generators can be synchronized to meet peak demand, and either can cover the other during maintenance without a blackout.

Plant LV electrical systems

Cabling, termination, glanding and tagging, on greenfield and brownfield projects, using our own design or a client design that we first review and verify.

Electrical panel building

Switchgear and MCC panels, from single-line and switching philosophy to detailed panel design, built by our own assembly technicians. Most panels are designed using MATLAB.

INSTRUMENTATION & CONTROL

From field instrument to control system

Our engineers and technicians install process instruments following installation drawings, OEM guidelines and industry best practice. We install, calibrate, configure and commission individual instruments and instrument skids for measurement, analysis and dosing, including sensors and transmitters for pressure, temperature, level, differential pressure and flow, and gauges.
The values from these instruments are cascaded to the control system (DCS, PLC or proprietary microprocessor controller). We have the manpower and resources to deploy robust process control (PCS), automation and SCADA systems, with the PLC and DCS as the backbone.

PROTOCOLS AND SIGNALS

SIS

Safety instrumented systems

The safety instrumented system is similar to the PCS, but it carries the instrument interlocks that command safety actions such as emergency shutdown. Systems are designed to specifications such as safety integrity level (SIL 1, 2 or 3), and the equipment used is expected to meet certification requirements such as UL.

FIRE & GAS

Fire and gas detection

We deploy a full range of fire and gas detection and alarming solutions. Explosion-proof (ATEX) or intrinsically safe equipment is used to protect hazardous areas, and fire & gas alarm control panels are SIL rated where necessary. Our safety design engineers follow IEC 61508, NFPA 72, EN54 and other applicable standards, and carry out fire mapping before specifying equipment such as:

INSTRUMENTED SAFETY & SECURITY SYSTEMS

Security and access systems, plus PPE

We deploy instrumented security and access systems for plant and facility protection. We also supply all types of PPE, including firefighters’ fire-retardant gear, body harnesses, respirators and personal mobile gas detectors.

PRE-ENGINEERED CONTROL ROOMS

Control rooms built around your process

Over time, serving clients building new control rooms and retrofitting or expanding existing ones, we have built up knowledge in the design and build of pre-engineered control rooms: modular for scalable projects and non-modular for non-scalable ones. We apply knowledge of the plant’s process and required control functions to determine which ICSS systems are needed, as well as the control functions for OEM packages such as compressors, pumps and firefighting.
Control room buildings can be designed to withstand explosions. At minimum, our fabricated buildings are fire rated, IP67 rated to withstand harsh weather, and reinforced to withstand casual attacks.

WE BUILD CONTROL PANELS FOR

We also provide cable trays and cutouts for cables in the control building, fire detection and alarm, lighting, power distribution, access control, emergency signs, fire suppression and HVAC.

FAQ

Frequently asked questions

Yes. Unlike many EICA subcontractors, we take engineering responsibility for our designs, because we install and commission them. Before accepting a subcontract, we also validate the EICA engineering design and confirm the procurement MTO.

Yes. Building power and control panels is a dedicated business segment. We build switchgear, MCC, power synchronization and control panels.

Yes. Selex can act as EICA subcontractor to itself where we are the EPC contractor, or to other EPC contractors.

Yes. We design, procure, install and commission EICA systems as part of a turnkey plant, or as part of an EICA retrofit, upgrade or modification and enhancement of plant power and control systems.

Our offshore operations are currently limited to electrical, instrumentation, automation, control, and operations support and maintenance services.

Lists of our equipment and facilities are available on request from verified prospective clients (end-users only).